Techno Blender
Digitally Yours.

Improved cathode material for electric vehicle batteries packs up to 25% more energy for longer drives

0 63


Scanning electron microscopy images at different magnifications reveal the spherelike morphology of the powder particles of NMC622, one of the two materials synthesized in the study by Skoltech researchers. The image is relatively sparsely populated by particles for better visibility, but their spherical morphology means that in an actual battery, they can be compacted to a greater extent than the conventional octahedron-shaped particles, so the material will provide more energy density per unit volume, miniaturizing the battery it is used in. Credit: Ivan Moiseev et al./Energy Advances

Skoltech researchers have developed a novel material for lithium-ion batteries powering electric vehicles. With its ultrahigh energy density, the new cathode material promises longer driving ranges on one charge. Reported in Energy Advances and patented with Rospatent, the material is a familiar nickel-rich layered transition metal oxide, but with an altered microstructure that packs more energy per unit volume.

“Cathode materials are an important bottleneck as far as electric vehicle batteries are concerned,” principal investigator Professor Artem Abakumov from Skoltech Energy commented. “The cathodes in batteries powering electric cars tend to use layered transition metal oxides, including nickel-rich ones. We improved two commonly used materials of this kind, achieving a 10% to 25% increase in energy density. This translates into smaller cathodes, more compact batteries, and therefore greater energy storage capacity for the same volume. As an added bonus, the material is slower to deteriorate.”

The layered oxide originally used in battery cathodes had the formula LiCoO2. In currently used materials, some of the cobalt atoms are replaced by nickel and manganese. These materials are known by technical names such as NMC811, where the numbers reflect the ratio between the three elements in the chemical formula—for example, eight nickel atoms per one atom of manganese and one atom of cobalt. Without changing their chemical composition, Skoltech researchers improved NMC811 and its cousin NMC622 by tweaking the materials’ microstructural organization.

Conventional NMCs are powdered polycrystalline materials, meaning that each secondary particle is made up of randomly oriented grains. The crystal structure within any given grain is nearly flawless, but since no two grains fit perfectly together, some empty spaces inevitably arise at grain boundaries. The single-crystal counterparts of polycrystalline NMCs are just what the name says: Each powder particle is basically one large grain with no wasted spaces in it. These single crystals are usually octahedron-shaped.

“Our material is a single-crystal NMC with spherical particles, combining the best of both worlds as far as maximizing density goes. Unlike polycrystals, the powder particles don’t have internal structure, so there are no wasted spaces at grain boundaries. But on top of that, you can also pack more spherically shaped single crystals into the same limited volume than octahedron-shaped ones, so you get more density on that account, too,” study co-author Skoltech Research Scientist Aleksandra Savina said.

Besides denser packing, the spherical shape of the crystals reduces the area of contact with the electrolyte, minimizing unwanted interactions that over time cause cathode degradation due to crack formation in the particles of conventional NMCs. This should prolong the operating life of the cathode and battery on the whole.

To alter the layered oxide morphology, Skoltech researchers tweaked the synthesis procedure, which relies on the so-called flux method.

Ordinarily, you start with a precursor with homogeneously distributed nickel, manganese, and cobalt. You mix in lithium hydroxide or some other source of lithium, and anneal at high temperature.

“What we do is after adding the lithium-containing compound, we also mix in an inert salt that has a low melting point, and we melt that mixture and anneal at high temperature. We then wash away the salt and anneal again to get rid of the products of any unwanted reactions with water. But the key is that depending on which inert salt is used and in what amount, the particle geometry will change. With conventional synthesis, on the other hand, there’s really not much you can do to affect morphology,” study co-author and Skoltech MSc student Alina Pavlova explained.

The team identified the salt parameters that promoted spherical particle formation. Tests confirmed that the resulting material had the same energy storage capacity per unit mass as the commercial analogs but had greater energy density, enabling more power to be packed into the same limited space.

Asked about their future plans, the researchers said they intended to experiment with particle size, combining smaller and larger spheres for an even denser packing. The team will also pursue layered transition metal oxides that would replace even more cobalt and manganese atoms with nickel, further enhancing energy storage capacity.


New cathode design solves major barrier to better lithium-ion batteries


More information:
Ivan A. Moiseev et al, Single crystal Ni-rich NMC cathode materials for lithium-ion batteries with ultra-high volumetric energy density, Energy Advances (2022). DOI: 10.1039/D2YA00211F

Provided by
Skolkovo Institute of Science and Technology


Citation:
Improved cathode material for electric vehicle batteries packs up to 25% more energy for longer drives (2022, October 18)
retrieved 18 October 2022
from https://techxplore.com/news/2022-10-cathode-material-electric-vehicle-batteries.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.




Improved cathode material for electric vehicle batteries packs up to 25% more energy for longer drives
Scanning electron microscopy images at different magnifications reveal the spherelike morphology of the powder particles of NMC622, one of the two materials synthesized in the study by Skoltech researchers. The image is relatively sparsely populated by particles for better visibility, but their spherical morphology means that in an actual battery, they can be compacted to a greater extent than the conventional octahedron-shaped particles, so the material will provide more energy density per unit volume, miniaturizing the battery it is used in. Credit: Ivan Moiseev et al./Energy Advances

Skoltech researchers have developed a novel material for lithium-ion batteries powering electric vehicles. With its ultrahigh energy density, the new cathode material promises longer driving ranges on one charge. Reported in Energy Advances and patented with Rospatent, the material is a familiar nickel-rich layered transition metal oxide, but with an altered microstructure that packs more energy per unit volume.

“Cathode materials are an important bottleneck as far as electric vehicle batteries are concerned,” principal investigator Professor Artem Abakumov from Skoltech Energy commented. “The cathodes in batteries powering electric cars tend to use layered transition metal oxides, including nickel-rich ones. We improved two commonly used materials of this kind, achieving a 10% to 25% increase in energy density. This translates into smaller cathodes, more compact batteries, and therefore greater energy storage capacity for the same volume. As an added bonus, the material is slower to deteriorate.”

The layered oxide originally used in battery cathodes had the formula LiCoO2. In currently used materials, some of the cobalt atoms are replaced by nickel and manganese. These materials are known by technical names such as NMC811, where the numbers reflect the ratio between the three elements in the chemical formula—for example, eight nickel atoms per one atom of manganese and one atom of cobalt. Without changing their chemical composition, Skoltech researchers improved NMC811 and its cousin NMC622 by tweaking the materials’ microstructural organization.

Conventional NMCs are powdered polycrystalline materials, meaning that each secondary particle is made up of randomly oriented grains. The crystal structure within any given grain is nearly flawless, but since no two grains fit perfectly together, some empty spaces inevitably arise at grain boundaries. The single-crystal counterparts of polycrystalline NMCs are just what the name says: Each powder particle is basically one large grain with no wasted spaces in it. These single crystals are usually octahedron-shaped.

“Our material is a single-crystal NMC with spherical particles, combining the best of both worlds as far as maximizing density goes. Unlike polycrystals, the powder particles don’t have internal structure, so there are no wasted spaces at grain boundaries. But on top of that, you can also pack more spherically shaped single crystals into the same limited volume than octahedron-shaped ones, so you get more density on that account, too,” study co-author Skoltech Research Scientist Aleksandra Savina said.

Besides denser packing, the spherical shape of the crystals reduces the area of contact with the electrolyte, minimizing unwanted interactions that over time cause cathode degradation due to crack formation in the particles of conventional NMCs. This should prolong the operating life of the cathode and battery on the whole.

To alter the layered oxide morphology, Skoltech researchers tweaked the synthesis procedure, which relies on the so-called flux method.

Ordinarily, you start with a precursor with homogeneously distributed nickel, manganese, and cobalt. You mix in lithium hydroxide or some other source of lithium, and anneal at high temperature.

“What we do is after adding the lithium-containing compound, we also mix in an inert salt that has a low melting point, and we melt that mixture and anneal at high temperature. We then wash away the salt and anneal again to get rid of the products of any unwanted reactions with water. But the key is that depending on which inert salt is used and in what amount, the particle geometry will change. With conventional synthesis, on the other hand, there’s really not much you can do to affect morphology,” study co-author and Skoltech MSc student Alina Pavlova explained.

The team identified the salt parameters that promoted spherical particle formation. Tests confirmed that the resulting material had the same energy storage capacity per unit mass as the commercial analogs but had greater energy density, enabling more power to be packed into the same limited space.

Asked about their future plans, the researchers said they intended to experiment with particle size, combining smaller and larger spheres for an even denser packing. The team will also pursue layered transition metal oxides that would replace even more cobalt and manganese atoms with nickel, further enhancing energy storage capacity.


New cathode design solves major barrier to better lithium-ion batteries


More information:
Ivan A. Moiseev et al, Single crystal Ni-rich NMC cathode materials for lithium-ion batteries with ultra-high volumetric energy density, Energy Advances (2022). DOI: 10.1039/D2YA00211F

Provided by
Skolkovo Institute of Science and Technology


Citation:
Improved cathode material for electric vehicle batteries packs up to 25% more energy for longer drives (2022, October 18)
retrieved 18 October 2022
from https://techxplore.com/news/2022-10-cathode-material-electric-vehicle-batteries.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

FOLLOW US ON GOOGLE NEWS

Read original article here

Denial of responsibility! Techno Blender is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment