Here’s your first look at the Samsung Galaxy Z Flip 6
After the Galaxy Z Fold 6 CAD renders appeared yesterday, the same has now happened with the Galaxy Z Flip 6. So, here’s your first look at the Galaxy Z Flip 6, courtesy of @OnLeaks and SmartPrix.
We’re looking at CAD-based renders once again. The source also shared a video that shows the phone all around, as it spins around in a loop. You can check out that video via the source link.
Here’s your very first look at the Galaxy Z Flip 6, thanks to CAD-based renders
With that being said, the Galaxy Z Flip 6 will look very similar to the Galaxy Z Flip 5, it seems. The sides will still be flat, but it seems like Samsung will go for slightly rounded edges of those sides, rather than chamfered edges. It will use the same approach as for the Galaxy S24. That should make the phone rather comfortable to hold and use.
The two rear cameras sit in the same spot as on the current-gen model. The same goes for the LED flash. Even the cover display has the same shape as it currently has, it has the so-called folder look.
The bezels on the front are thin, and a punch hole is once again centered at the top of the display. A Type-C USB port sits at the bottom, along with the main speaker. The power/lock button and volume rocker buttons are on the right. The power/lock button also doubles as a fingerprint scanner, which is why it doesn’t protrude like the volume keys.
The overall design is not much different
The phone also has one extra microphone at the top, compared to its predecessors, there are two up there now. The SIM cards will be accessible from the left, as that’s where the SIM card tray is located.
The Galaxy Z Flip 6 is said to measure around 165 x 71.1 x 7.4mm. That is very close to the Galaxy Z Flip 5’s measurements, though it’s a bit thicker at 7.4mm, the Galaxy Z Flip 5 was 6.9mm thick (without the camera bump).
It seems like the cover display will retain its 3.4-inch size, and the same will likely happen with the main 6.7-inch display. The phone is expected to launch in early July, alongside the Galaxy Z Fold 6, and the Galaxy Ring.
After the Galaxy Z Fold 6 CAD renders appeared yesterday, the same has now happened with the Galaxy Z Flip 6. So, here’s your first look at the Galaxy Z Flip 6, courtesy of @OnLeaks and SmartPrix.
We’re looking at CAD-based renders once again. The source also shared a video that shows the phone all around, as it spins around in a loop. You can check out that video via the source link.
Here’s your very first look at the Galaxy Z Flip 6, thanks to CAD-based renders
With that being said, the Galaxy Z Flip 6 will look very similar to the Galaxy Z Flip 5, it seems. The sides will still be flat, but it seems like Samsung will go for slightly rounded edges of those sides, rather than chamfered edges. It will use the same approach as for the Galaxy S24. That should make the phone rather comfortable to hold and use.
The two rear cameras sit in the same spot as on the current-gen model. The same goes for the LED flash. Even the cover display has the same shape as it currently has, it has the so-called folder look.
The bezels on the front are thin, and a punch hole is once again centered at the top of the display. A Type-C USB port sits at the bottom, along with the main speaker. The power/lock button and volume rocker buttons are on the right. The power/lock button also doubles as a fingerprint scanner, which is why it doesn’t protrude like the volume keys.
The overall design is not much different
The phone also has one extra microphone at the top, compared to its predecessors, there are two up there now. The SIM cards will be accessible from the left, as that’s where the SIM card tray is located.
The Galaxy Z Flip 6 is said to measure around 165 x 71.1 x 7.4mm. That is very close to the Galaxy Z Flip 5’s measurements, though it’s a bit thicker at 7.4mm, the Galaxy Z Flip 5 was 6.9mm thick (without the camera bump).
It seems like the cover display will retain its 3.4-inch size, and the same will likely happen with the main 6.7-inch display. The phone is expected to launch in early July, alongside the Galaxy Z Fold 6, and the Galaxy Ring.
Denial of responsibility! Techno Blender is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.