HPE Demonstrates Exascale Hardware: AMD’s and Intel’s Platforms Exposed
At the International Supercomputer (ISC 2022) trade show, HPE demonstrated blade systems that will power two exascale supercomputers set to come online this year — Frontier and Aurora. Unfortunately, HPE had to use sophisticated and power-hungry hardware to get unprecedented computing performance. Hence, both machines use liquid cooling, but even massive water blocks cannot hide some interesting design peculiarities the blades feature.
Both Frontier and Aurora supercomputers are built by HPE using its Cray EX architecture. While the machines leveraged AMD and Intel hardware, respectively, they use high-performance x86 CPUs to run general tasks, and GPU-based compute accelerators to run highly parallel supercomputing and AI workloads.
The Frontier supercomputer builds upon HPE’s Cray EX235a nodes (opens in new tab) powered by two AMD’s 64-core EPYC ‘Trento’ processors featuring the company’s Zen 3 microarchitecture enhanced with 3D V-Cache and optimized for high clocks. The Frontier Blades also come with eight of AMD’s Instinct MI250X accelerators (opens in new tab) featuring 14,080 stream processors and 128GB of HBM2E memory. Each node offers peak FP64/FP32 vector performance of around 383 TFLOPS and peak 765 FP64/FP32 matrix performance of approximately 765 TFLOPS. Both CPUs and compute GPUs used by HPE’s Frontier blade use a unified liquid cooling system with two nozzles on the front of the node.
The Aurora blade (opens in new tab) is currently called just like that, carries an Intel badge, and does not have HPE’s Cray Ex model number yet, possibly because it still needs some polishing. HPE’s Aurora Blades utilize two Intel Xeon Scalable ‘Sapphire Rapids’ processors with over 40 cores and 64GB of HBM2E memory per socket (in addition to DDR5 memory). The nodes also feature six of Intel’s Ponte Vecchio (opens in new tab) accelerators, but Intel is quiet about the exact specifications of these beasts that pack over 100 billion transistors each (opens in new tab).
One thing that catches the eye with the Aurora blade set to be used with the 2 ExaFLOPS Aurora supercomputers (opens in new tab) is mysterious black boxes with a triangular ‘hot surface’ sign located next to Sapphire Rapids CPUs and Ponte Vecchio compute GPUs. We do not know what they are, but they may be modular sophisticated power supply circuitry for additional flexibility. After all, back in the day, VRMs were removable (opens in new tab), so using them for highly power-hungry components might make some sense even today (assuming that the correct voltage tolerances are met), especially with pre-production hardware.
Again, the Aurora blade uses liquid cooling for its CPUs and GPUs, though this cooling system is entirely different from the one used by Frontier blades. Intriguingly, it looks like Ponte Vecchio compute GPUs in the Aurora blade use different water blocks than Intel demonstrated (opens in new tab) a few weeks ago though we can only wonder about possible reasons for that.
Interestingly, the DDR5 memory modules Intel-based blade uses come with rather formidable heat spreaders that look bigger than those used on enthusiast-grade memory modules. Keeping in mind that DDR5 RDIMMs also carry a power management IC and voltage regulating module, they naturally need better cooling than DDR4 sticks, especially in space-constrained environments like blade servers.
At the International Supercomputer (ISC 2022) trade show, HPE demonstrated blade systems that will power two exascale supercomputers set to come online this year — Frontier and Aurora. Unfortunately, HPE had to use sophisticated and power-hungry hardware to get unprecedented computing performance. Hence, both machines use liquid cooling, but even massive water blocks cannot hide some interesting design peculiarities the blades feature.
Both Frontier and Aurora supercomputers are built by HPE using its Cray EX architecture. While the machines leveraged AMD and Intel hardware, respectively, they use high-performance x86 CPUs to run general tasks, and GPU-based compute accelerators to run highly parallel supercomputing and AI workloads.
The Frontier supercomputer builds upon HPE’s Cray EX235a nodes (opens in new tab) powered by two AMD’s 64-core EPYC ‘Trento’ processors featuring the company’s Zen 3 microarchitecture enhanced with 3D V-Cache and optimized for high clocks. The Frontier Blades also come with eight of AMD’s Instinct MI250X accelerators (opens in new tab) featuring 14,080 stream processors and 128GB of HBM2E memory. Each node offers peak FP64/FP32 vector performance of around 383 TFLOPS and peak 765 FP64/FP32 matrix performance of approximately 765 TFLOPS. Both CPUs and compute GPUs used by HPE’s Frontier blade use a unified liquid cooling system with two nozzles on the front of the node.
The Aurora blade (opens in new tab) is currently called just like that, carries an Intel badge, and does not have HPE’s Cray Ex model number yet, possibly because it still needs some polishing. HPE’s Aurora Blades utilize two Intel Xeon Scalable ‘Sapphire Rapids’ processors with over 40 cores and 64GB of HBM2E memory per socket (in addition to DDR5 memory). The nodes also feature six of Intel’s Ponte Vecchio (opens in new tab) accelerators, but Intel is quiet about the exact specifications of these beasts that pack over 100 billion transistors each (opens in new tab).
One thing that catches the eye with the Aurora blade set to be used with the 2 ExaFLOPS Aurora supercomputers (opens in new tab) is mysterious black boxes with a triangular ‘hot surface’ sign located next to Sapphire Rapids CPUs and Ponte Vecchio compute GPUs. We do not know what they are, but they may be modular sophisticated power supply circuitry for additional flexibility. After all, back in the day, VRMs were removable (opens in new tab), so using them for highly power-hungry components might make some sense even today (assuming that the correct voltage tolerances are met), especially with pre-production hardware.
Again, the Aurora blade uses liquid cooling for its CPUs and GPUs, though this cooling system is entirely different from the one used by Frontier blades. Intriguingly, it looks like Ponte Vecchio compute GPUs in the Aurora blade use different water blocks than Intel demonstrated (opens in new tab) a few weeks ago though we can only wonder about possible reasons for that.
Interestingly, the DDR5 memory modules Intel-based blade uses come with rather formidable heat spreaders that look bigger than those used on enthusiast-grade memory modules. Keeping in mind that DDR5 RDIMMs also carry a power management IC and voltage regulating module, they naturally need better cooling than DDR4 sticks, especially in space-constrained environments like blade servers.
Denial of responsibility! Techno Blender is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.