Techno Blender
Digitally Yours.

Vapor leak on unused pump caused Suncor’s Christmas Eve fire

0 27



The Christmas Eve fire that injured two workers at Suncor Energy’s Commerce City refinery began when a vapor cloud leaked from an unused pump valve and exploded as the facility was being shut down after extreme cold caused equipment failures, according to a federal investigation.

The vapor was released from a pump that was not functional and had not been used or properly inspected in seven years, according to the report detailing the U.S. Occupational Safety and Health Administration‘s investigation into the accident. The fire burned for six hours.

The report, obtained by The Denver Post through a federal Freedom of Information Act request, said the likelihood of injury had been higher because “employees were exposed to the hazards for nearly 7 years without the equipment being inspected properly.”

Suncor was fined $15,625 — the maximum allowed — in June for a serious violation of federal safety standards in connection with the fire at Colorado’s only oil refinery.

Most of the 1,090-page report was redacted, but it still revealed some new information about the circumstances surrounding the Dec. 24 fire that burned one person’s face so badly that he was hospitalized. A second worker was injured but did not need hospitalization, according to the report.

OSHA officials could not be reached to explain why so much of the investigative report was withheld from the public.

Efforts to reach Suncor officials about the report also were unsuccessful.

The report raises questions about how Suncor manages its inspection of “dead legs,” an industry term for pipes that are no longer used and are shut off from liquids and vapors.

The explosion took place after a cold front rolled into the region, causing an extreme and fast temperature drop, on the afternoon of Dec. 21. The deep freeze caused extensive problems, and Suncor officials over the course of about a week shut down the refinery.

The Commerce City facility remained closed until early April while it was being repaired, fueling a more than 50% jump in gas prices in Colorado.

The cause of the shutdown was shrouded in secrecy with Suncor revealing little information about what had happened. Since then, details have been emerging in bits and pieces.

At a Nov. 16 meeting of the Air Quality Control Commission, state air regulators gave a briefing on Suncor’s operations and their efforts to enforce environmental regulations at the refinery. That briefing included an update on the December shutdown, which remains under investigation by the state’s Air Pollution Control Division.

The extreme weather caused instruments to freeze and the refinery was unable to make steam, said Shannon McMillan, who manages the air division’s compliance and enforcement program. Other equipment also needed to be shut off because of freezing and thawing issues.

“There were also two people that were injured during the initial days of the shutdown, which obviously further elevated the concerns about what was going on,” McMillan said.



The Christmas Eve fire that injured two workers at Suncor Energy’s Commerce City refinery began when a vapor cloud leaked from an unused pump valve and exploded as the facility was being shut down after extreme cold caused equipment failures, according to a federal investigation.

The vapor was released from a pump that was not functional and had not been used or properly inspected in seven years, according to the report detailing the U.S. Occupational Safety and Health Administration‘s investigation into the accident. The fire burned for six hours.

The report, obtained by The Denver Post through a federal Freedom of Information Act request, said the likelihood of injury had been higher because “employees were exposed to the hazards for nearly 7 years without the equipment being inspected properly.”

Suncor was fined $15,625 — the maximum allowed — in June for a serious violation of federal safety standards in connection with the fire at Colorado’s only oil refinery.

Most of the 1,090-page report was redacted, but it still revealed some new information about the circumstances surrounding the Dec. 24 fire that burned one person’s face so badly that he was hospitalized. A second worker was injured but did not need hospitalization, according to the report.

OSHA officials could not be reached to explain why so much of the investigative report was withheld from the public.

Efforts to reach Suncor officials about the report also were unsuccessful.

The report raises questions about how Suncor manages its inspection of “dead legs,” an industry term for pipes that are no longer used and are shut off from liquids and vapors.

The explosion took place after a cold front rolled into the region, causing an extreme and fast temperature drop, on the afternoon of Dec. 21. The deep freeze caused extensive problems, and Suncor officials over the course of about a week shut down the refinery.

The Commerce City facility remained closed until early April while it was being repaired, fueling a more than 50% jump in gas prices in Colorado.

The cause of the shutdown was shrouded in secrecy with Suncor revealing little information about what had happened. Since then, details have been emerging in bits and pieces.

At a Nov. 16 meeting of the Air Quality Control Commission, state air regulators gave a briefing on Suncor’s operations and their efforts to enforce environmental regulations at the refinery. That briefing included an update on the December shutdown, which remains under investigation by the state’s Air Pollution Control Division.

The extreme weather caused instruments to freeze and the refinery was unable to make steam, said Shannon McMillan, who manages the air division’s compliance and enforcement program. Other equipment also needed to be shut off because of freezing and thawing issues.

“There were also two people that were injured during the initial days of the shutdown, which obviously further elevated the concerns about what was going on,” McMillan said.

FOLLOW US ON GOOGLE NEWS

Read original article here

Denial of responsibility! Techno Blender is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment